Electrical Component Identification

Since we've got some smart folks on here, I thought I'd see if I can't get some help identifying an electrical component.

Problem: I have 2 bug zappers that have seen a bit of use and, I thought needed new bulbs because whenever something would short the electrical grid the lights would go off. It would also have trouble staying on steady sometimes flashing off and coming back on.

Got 2 new bulbs and no change.

These zappers are about $50 at Walmart each and I figured since they're not working right I may as well dig into one of them to see if I can fix it myself.

I opened one up and they look pretty simple. Line comes in, goes to one prong of 4 on the neon UV light, prong 2 jumpers across to prong 3 with this small glass bulb looking thing, then comes out on the 4th prong of the bulb, goes to one side of a fairly good size transformer for the electrical grid, comes out the other side of the transformer, and returns to the line in.

I was expecting to see a neon starter in there I could replace but I saw the glass bulb looking deal instead. That glass bulb is what I need help identifying. It has some scorch marks inside and looks like it could use replacing. Looking at it, it looks a lot like a little Nixie tube light. I had a few sitting around that I had ordered in bulk a long time ago and swapped one in on the off chance it would work. Of course it didn't.

So, here is a picture of the bulb thing. It is on the left, Nixie tube light is on the right for reference:

http://www.transasianaxis.com/attach...8&d=1401999320

And here is what it looks like when the UV bulb flashes on:

http://www.transasianaxis.com/attach...7&d=1401999312


Is this an electrical ballast of some sort or, is it something else? And where do I find 2 new ones?

Well, question asked and answered! LOL!

I went poking around a little more, this time on YouTube and found someone had done a very helpful repair video seen below.





It is a starter! Stinger just cheaps out and doesn't put it in it's little cylindrical housing.

I'm off to go take one apart and see what I can do...

Well, I used the FS2 starter as mentioned in the vid and it didn't work. FS2 is good for up to 22w so I can't say I'm terribly surprised. The lamp is 40w but it worked in the video. Maybe his weren't 40w bulbs... Going to pick up a couple FS4s and see if those work.

Sorry was out of pocket and didn't see this. Couldn't have answered this one. I never took a bug zapper apart. lol